Times are displayed in (UTC-05:00) Central Time (US & Canada) Change

146-8 Preliminary Investigation of Storm Water Treatment Incorporating 3D Printed Porous Media

Session: Contaminants Near Groundwater-Surface Water Interfaces (Posters)

Poster Booth No.: 64

Presenting Author:

Saika Nowshin Nowrin

Authors:

Nowrin, Saika Nowshin¹, Cheng, Chu-Lin², Ho, Jungseok³

(1) Civil Engineering, The University of Texas Rio Grande Valley, Edinburg, Texas, USA, (2) Civil Engineering, The University of Texas Rio Grande Valley, Edinburg, TX, USA; School of Earth, Environmental and Marine Sciences, The University of Texas Rio Grande Valley, Edinburg, Texas, USA, (3) Civil Engineering, The University of Texas Rio Grande Valley, Edinburg, Texas, USA,

Abstract:

Urban stormwater runoff through impervious surfaces can contain a complex mixture of contaminants, including heavy metals, microplastics, and hydrocarbons, which can cause degradation of water quality in waterways and pose a high risk to public health. Decentralized stormwater treatment systems, such as bioswales and detention ponds, are contributing more significantly to reducing contaminant transport by treating surface runoff near its source. This study aims to evaluate the potential of stormwater treatment systems by integrating 3D printed Polylactic Acid (PLA-biodegradable thermoplastic polymer) porous filters with graphene oxide (GO) coating in the bioswale system of UTRGV parking lot, which is a site designed with layered porous media as a part of the low impact development (LID) initiative. Engineered 3D printed filters will enhance infiltration and pollutant removal in storm water applications due to their flexible design geometry as a porous medium. Laboratory column experiments were designed to simulate stormwater flow vertically through layered soil mimicking infiltration through the porous media and 3D printed filter that enables direct measurement of hydraulic parameters and sorption co-efficient. Preliminary design and material selection indicates that the filter will enhance water quality by removing heavy metals like Pb²⁺_, Cd²⁺, Zn^2+,Cu²⁺ more than 80% and facilitate microplastic capture (more than 70%) with retention capacity due to the presence of abundant oxygen containing functional groups in Graphene Oxide coating. The parameters obtained from laboratory experiments will be used to calibrate and parameterize storm water management models (PCSWMM) to improve the simulation of pollutant load and treatment performance under realistic urban conditions. The results of this study will provide useful insights into future designs of cost-effective and sustainable stormwater treatment systems.

Geological Society of America Abstracts with Program. Vol. 57, No. 6, 2025

doi: 10.1130/abs/2025AM-8381

Preliminary Investigation of Storm Water Treatment Incorporating 3D Printed Porous Media

Description

Session Format: Poster

Presentation Date: 10/20/2025

Presentation Room: HBGCC, Hall 1

Poster Booth No.: 64

Author Availability: 3:30–5:30 p.m.

Back to Session